Monday 28 July 2014

E60: Removing Acoustic Engine-Covers for 6-Cyl. Diesels [525d, 530d, 535d]

Engine Acoustic Covers:

1. Remove the five screws holding the main engine-cover using a 5mm allen-key or male-hex socket and lift it off. The screws are located one either side at the front and rear and the fifth next to the PAS fluid cap.


2. Remove the left and right pollen-filter from the plastic panels by popping off the metal-clip and undoing the plastic nut with the arrow a 1/4 turn using a 13mm socket.

3. Disconnect the wiring connector for the 'bonnet-open' switch, located on the left hand plastic heater-duct in front of the pollen-filter.

4. Remove the left and right plastic air-duct panels from the back of the engine-bay under the windscreen by undoing the plastic nuts with the arrow a 1/4 turn using a 13mm socket. The nuts are located one either side under the pollen-filter and one in the middle joining both panels.


5. Remove the strut-brace by undoing the bolt holding on either side holding it to the suspension turrets and the two in the middle using an E12 double-hex or star socket.


6. Remove the two screws holding the rear engine-cover, one either side, using a 5mm male-hex socket or Allen-key and lift it off.


Air-box Housing / Air-Filter Inlet:

No comments:

Post a Comment